User Manual

ManualsBrandsNETGEAR ManualsComputers & Accessories24-Port Gigabit Ethernet PoE+ Smart Switch with 2 SFP Ports (190W)

221

222

223

224

225

226

227

228

229

230

Table Of Contents

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports

Configure Quality of Service User Manual221

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page 19 or Access the switch off-network and not

connected to the Internet on page 27.

The Device UI login page displays.

If you did not yet activate your warranty, the Register to activate your warranty page

displays. For more information, see

4. Enter one of the following passwords:

• Enter your device admin password.

• If you previously managed the switch through the Insight app or

Cloud portal, enter

the Insight network password for the last Insight network location.

For information about the credentials, see

Credentials for the device UI on page 28.

5. Click the Go

button.

The System Information page displays.

6. Select QoS >

DiffServ > Advanced > Class Configuration.

The Class Name page displays.

7. Select the check box next to the class name.

8. In the Class

Name field, specify the new name.

9. Click the Apply

button.

Your settings are saved.

Change the criteria for an existing DiffServ class

To change the criteria for an existing DiffServ class:

1. Connect your

computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ether

net cable.

2. Launch a web browser.