User Manual

Table Of Contents
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Quality of Service User Manual217
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 30.
4. Enter one of the following passwords:
Enter your device admin password.
If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select QoS >
DiffServ > Advanced > Class Configuration.
The Class Name page displays.
7. In the Class
Name field, enter a class name.
The Class Name field also lists all existing DiffServ class names, from which you can
select one for modification or deletion. The class name can be
1 to 31 alphanumeric
characters in length.
The switch supports only the class type value All, which means that all the various match
criteria defined for the class are satisfied for a packet match. All sig
nifies the logical AND
statement of all the match criteria. For any class that you add, the class type is All.
8. Click the Add
button.
The new class is added.
9. After creating the class, click the class name.
The class name is a hyperlink to the page on which you can defi
ne the class
configuration.