User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Switching User Manual196
For information about the credentials, see Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select Switching > Address
Table > Basic > Address Table.
7. Use the Search menu and field to search for a MAC address, VLAN ID, or interface number:
• MAC Address. From the Search menu, select MAC Address, and enter the 6-byte
hexadecimal MAC address in two-digit groups separated by colons
, for example,
01:23:45:67:89:AB. Then click the Go button.
If the address exists, that entry is displayed as the first entry followed by the
remaining (higher) MAC addresses. An exact match is required.
• VLAN ID
. From the Search menu, select VLAN ID, and enter the VLAN ID, for
example, 100. Then click the Go button.
• Interface. From the Search menu, select Interface, and enter the interface ID using
the respective interface naming convention (for example, g1 or l1). Then click the Go
button.
8. To refresh the page with the latest information about the switch, click the Refresh button.
9. To clear all dynamic MAC address entries in the table, click the Clear
button.
The following table describes the nonconfigurable information on the page.
Table 39. MAC address table information
Field Description
Total MAC Addresses The number of MAC addresses learned or configured.
VLAN ID The VLAN ID associated with the MAC address.
MAC Address The unicast MAC address for which the switch holds forwarding and/or filtering
information.
The format is a 6-byte MAC address that is separated by colons, for
example 01:23:45:67:89:AB.