User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Switching User Manual178
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 30.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select Switching > Multicast
> MFDB > MFDB Table.
7. In the Search by MAC Address field, enter a MAC address.
Enter six two-digit hexadecimal numbers separated by colons, for example
01:00:5e:45:67:89.
8. Click the Go
button.
If the address exists, the entry is displayed. An exact match is required.
The following describes the nonconfigurable information on the page.
Table 34. MFDB table information
Field Description
MAC Address The multicast MAC address for which you requested data.
VLAN ID The VLAN ID to which the multicast MAC address is related.
Type The type of the entry. Static entries are those that are configured by the end user
.
Dynamic entries are added to the table as a result of a learning process or protocol.
Component The
component that is responsible for this entry in the Multicast Forwarding Database.
The options are IGMP snooping, GMRP
, Static Filtering, and MLD snooping.
Description The text description of this multicast table entry. The options are Management
Configured, Network Configured, and Network Assisted.
Forwarding Interfaces The resultant
forwarding list is derived from combining all the forwarding interfaces
and
removing the interfaces that are listed as the static filtering interfaces.