User Manual

Configure Switching
149
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > Address Table > Basic > Address Table.
6. Use the Search menu and field to search for a MAC address, VLAN ID, or interface
number:
• Search by MAC Address. From the Search menu, select MAC Address, and enter
the 6-byte hexadecimal MAC address in two-digit groups separated by colons, for
example, 01:23:45:67:89:AB. Then click the Go button.
If the address exists, that entry is displayed as the first entry followed by the
remaining (higher) MAC addresses. An exact match is required.
• Search VLAN ID. From the Search menu, select VLAN ID, and enter the VLAN ID,
for example, 100. Then click the Go button.
• Search Interface. From the Search menu, select Interface, and enter the interface ID
using the respective interface naming convention (for example, g1 or l1). Then click the
Go button.
The following table describes the nonconfigurable information on the page.
Table 36. MAC Address Table information
Field Description
Total MAC Address The number of total MAC addresses learned or configured.
MAC Address A unicast MAC address for which the switch holds forwarding and/or
filtering information. The format is a 6-byte MAC address that is separated
by colons, for example 01:23:45:67:89:AB.
VLAN ID The VLAN ID associated with the MAC address.