Quick Start Manual

10
GS716T/GS724T Gigabit Smart Switch
GS716T Front and Back Panel Configuration
The GS716T is a 24-port 10/100/1000 Mbps + 2 SFP Combo ports Smart Switch. Every
RJ-45 port is capable of sensing the line speed and negotiating the operation duplex mode
with the link partner automatically
Figure 2 illustrates the NETGEAR GS716T Smart Switch front panel:
The front panel contains the following:
• 16 RJ-45 connectors for 10/100/1000 Mbps auto sensing Gigabit Ethernet switching
ports.
• Two SFP slots for SFP modules supporting 1000 (1000BASE-SX/LX)/100 Mbps SFP.
• Reset button to restart the device.
• Recessed default reset button to restore the device back to the factory defaults.
• Port LEDs
• System LEDs
Figure 3 illustrates the NETGEAR GS716T Smart Switch back panel:
The back panel contains the following:
• A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for
accommodating the supplied power cord.
Figure 2. GS716T Front Panel
Figure 3. GS716T Back Panel
MODEL
GS716T
ProSafe 16 Port Gigabit Smart Switch
15F 16F
Link/
ACT
Link/
ACT
Factory
Defaults
Reset PWR
1357
2468
9111315T
10 12 14 16T
®
LINK/ ACT
SPD
FDX
LINK/ ACT
SPD
FDX
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
Yellow (100 M)
Green (1000 M)
Uplink
™
Auto
System LEDs
SFP Ports
10/100/1000 Mbps Ethernet Ports
100-240 V ~ 50-60Hz
Power Connector