User Manual
Table Of Contents
- 16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports and Cloud Management
- Contents
- 1 Get Started
- Available publications
- Switch management options and default management mode
- Manage the switch by using the device UI
- About on-network and off-network access
- Access the switch on-network and connected to the Internet
- Use a Windows-based computer to access the switch on-network and connected to the Internet
- Use the NETGEAR Insight mobile app to discover the IP address of the switch
- Use the NETGEAR Switch Discovery Tool to discover the switch when it is connected to the Internet
- Discover the switch in a network with a DHCP server using the Smart Control Center
- Use other options to discover the switch IP address
- Access the switch on-network and connected to the Internet when you know the switch IP address
- Access the switch off-network and not connected to the Internet
- Credentials for the device UI
- Register the switch
- Change the language of the device UI
- Change the management mode of the switch
- Use the Device View of the device UI
- Configure interface settings
- Access the NETGEAR support website
- Access the user manual online
- 2 Configure System Information
- View or define switch system information
- Configure the switch IP address settings
- Configure the IPv6 network interface
- Configure the time settings
- Configure Denial of Service settings
- Configure the DNS settings
- Configure green Ethernet settings
- Use the Device View
- Configure Power over Ethernet
- Configure SNMP
- Configure LLDP
- Configure DHCP snooping
- Set up PoE timer schedules
- 3 Configure Switching
- Configure the port settings and maximum frame size
- Configure link aggregation groups
- Configure VLANs
- Configure a voice VLAN
- Configure Auto-VoIP
- Configure Spanning Tree Protocol
- Configure multicast
- Manage IGMP snooping
- Configure IGMP snooping
- Configure IGMP snooping for interfaces
- View, search, or clear the IGMP snooping table
- Configure IGMP snooping for VLANs
- Modify IGMP snooping settings for a VLAN
- Disable IGMP snooping on a VLAN
- Configure one or more IGMP multicast router interfaces
- Configure an IGMP multicast router VLAN
- IGMP snooping querier overview
- Configure an IGMP snooping querier
- Configure an IGMP snooping querier for a VLAN
- Display the status of the IGMP snooping querier for VLANs
- View, search, and manage the MAC address table
- Configure Layer 2 loop protection
- 4 Configure Quality of Service
- 5 Manage Device Security
- Change the device admin password for the device UI
- Manage the RADIUS settings
- Configure the TACACS+ settings
- Manage the Smart Control Center
- Configure management access
- Control access with profiles and rules
- Configure port authentication
- Set up traffic control
- Configure access control lists
- Use the ACL Wizard to create a simple ACL
- Configure a MAC ACL
- Configure MAC ACL rules
- Configure MAC bindings
- View or delete MAC ACL bindings in the MAC binding table
- Configure a basic or extended IPv4 ACL
- Configure rules for a basic IPv4 ACL
- Configure rules for an extended IPv4 ACL
- Configure an IPv6 ACL
- Configure rules for an IPv6 ACL
- Configure IP ACL interface bindings
- View or delete IP ACL bindings in the IP ACL binding table
- Configure VLAN ACL bindings
- 6 Monitor the System
- 7 Maintain or Troubleshoot the Switch
- A Configuration Examples
- B Specifications and Default Settings
16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
User Manual6
Manage IGMP snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
Configure IGMP snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Configure IGMP snooping for interfaces. . . . . . . . . . . . . . . . . . . . . . . . 186
View, search, or clear the IGMP snooping table. . . . . . . . . . . . . . . . . . 188
Configure IGMP snooping for VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Modify IGMP snooping settings for a VLAN . . . . . . . . . . . . . . . . . . . . . 191
Disable IGMP snooping on a VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Configure one or more IGMP multicast router interfaces. . . . . . . . . . 192
Configure an IGMP multicast router VLAN . . . . . . . . . . . . . . . . . . . . . . 194
IGMP snooping querier overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Configure an IGMP snooping querier . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Configure an IGMP snooping querier for a VLAN . . . . . . . . . . . . . . . . 197
Display the status of the IGMP snooping querier for VLANs . . . . . . . 198
View, search, and manage the MAC address table. . . . . . . . . . . . . . . . . . .199
View, search, or clear the MAC address table . . . . . . . . . . . . . . . . . . . 200
Set the dynamic address aging interval. . . . . . . . . . . . . . . . . . . . . . . . . 201
Add a static MAC address to the MAC address table . . . . . . . . . . . . . 202
Configure Layer 2 loop protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203
Configure global Layer 2 loop protection. . . . . . . . . . . . . . . . . . . . . . . 204
View and configure Layer 2 loop protection on a port . . . . . . . . . . . . 205
Chapter 4 Configure Quality of Service
Quality of Service concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Manage Class of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209
CoS configuration concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Configure the global CoS settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Configure the CoS settings for an interface . . . . . . . . . . . . . . . . . . . . . 211
Configure the CoS queue settings for an interface . . . . . . . . . . . . . . . 213
Map 802.1p priorities to queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Map DSCP values to queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Manage Differentiated Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Defining DiffServ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Configure the DiffServ mode and display the entries in the
DiffServ private MIB tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
Configure a DiffServ class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Configure DiffServ IPv6 class settings . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Configure a DiffServ policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
Configure the DiffServ service interface . . . . . . . . . . . . . . . . . . . . . . . . 238
View DiffServ service statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Chapter 5 Manage Device Security
Change the device admin password for the
device UI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
Manage the RADIUS settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246
Configure the global RADIUS server settings. . . . . . . . . . . . . . . . . . . . 246
Configure a RADIUS authentication server on the switch. . . . . . . . . . 248
Configure a RADIUS accounting server. . . . . . . . . . . . . . . . . . . . . . . . . 252