User Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Get Started User Manual45
To configure all LAGs:
1. Click the LAG link to display only the LAG interfaces.
2. Select the check box in the heading row.
The check box associated with every LAG is selected, and the ro
ws for all LAGs are
highlighted.
3. Configure the
desired settings.
4. Click the Apply
button.
Your settings are saved.
To configure multiple ports and LAGs:
1. Click the All
link to display all ports and LAGs.
2. Select the check box associated with each port and LAG to configure.
The rows for the selected ports and LAGs are highlighted.
3. Configure the
desired settings.
4. Click the Apply
button.
Your settings are saved.
To configure all ports and LAGs:
1. Click the All
link to display all ports and LAGs.
2. Select the check box in the heading row.
The
check box associated with every port and LAG is selected, and the
rows for all ports
and LAGs are highlighted.
3. Configure the desired settings.
4. Click the Apply
button.
Your settings are saved.
Access the NETGEAR support website
From the device UI, you can access the NETGEAR support website at
netgear.com/support.
To access the support website from the device UI:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.