User Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Get Started User Manual42
Use these links as follows:
• To display all ports, click the 1 link.
• To display all LAGs, click the LAG link.
• To display all ports and LAGs, click the All
link.
The procedures in this section describe how to select the ports
and LAGs to configure. The
procedures assume that you are already logged in to the switch. If you do not know how to
log in to the switch, see
Access the switch on-network and connected to the Internet on
page 17 or Access the switch off-network and not connected to the Internet on page 25.
To configure a single port by using the Go To Interface field:
1. Ensure that the
page is displaying all ports, and not only the LAGs.
2. In the Go T
o Interface field, type the port number, for example g3.
For more information, see
Configure interface settings on page 41.
3. Click the Go
button.
The check box associated with the interface is selected, the row for the
selected interface
is highlighted, and the interface number appears in the heading row.
4. Configure the desired settings.
5. Click the Apply
button.
Your settings are saved.
To configure a single LAG by using the Go To Interface field:
1. Click the LAG
link or the All link to display the LAGs.
2. In the Go T
o Interface field, type the LAG number, for example l3.
For information, see
Configure interface settings on page 41.