User Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Maintain or Troubleshoot the Switch User Manual404
5. Click the Go button.
The System Information page displays.
6. Select Maintenance > T
roubleshooting > Ping IPv6.
7. In the IPv6 Address/Hostname field, enter the IPv6 address or host name of the station
that must be pinged.
The format is xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx. The maximum number of
characters is 255.
8. In the Count
field, enter the number of echo requests that must be sent.
The range is 1 to 15. The default value is 3.
9. In the Interval (secs)
field, enter the time in seconds between ping packets.
The range is 1 to 60. The default value is 3.
10. In the Size
field, enter the datagram size.
The valid range is 0 to 13000. The default value is 0 bytes.
11. Click the Apply
button.
The specified address is pinged. The results are displayed below the configurable
data in
the Results field.