User Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Maintain or Troubleshoot the Switch User Manual402
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 17 or Access the switch off-network and not
connected to the Internet on page 25.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 28.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 26.
5. Click the Go
button.
The System Information page displays.
6. Select Maintenance > T
roubleshooting > Ping IPv4.
7. In the IP Address/Host Name field, enter the IP address or host name of the device that
must be pinged.
8. In the Count
field, enter the number of echo requests that must be sent.
The default value is 3. The range is 1 to 15.
9. In the Interval (secs)
field, enter the time between ping packets in seconds.
The default value is 3 seconds. The range is 1 to 60.
10. In the Size
field, enter the size of the ping packet. The default value is 0 bytes. The range is
0 to 13000.