User Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Maintain or Troubleshoot the Switch User Manual400
6. Select Maintenance > File Management > Dual Image Configuration.
The Dual Image Configuration page displays.
7. From the Image
Name menu, select the image that is not the image displayed in the
Current-active field.
The Current-active field displays the name of the active image. Y
ou cannot delete the
active image.
8. Select the Delete Image check box.
9. Click the Apply
button.
The image is removed.
View the dual image status
You can view information about the active and backup images on the switch.
To view dual image status information:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 17 or Access the switch off-network and not
connected to the Internet on page 25.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 28.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 26.
5. Click the Go
button.
The System Information page displays.
6. Select Maintenance >
File Management > Dual Image > Dual Image Status.