User Manual
Table Of Contents
- 16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports and Cloud Management
- Contents
- 1 Get Started
- Available publications
- Switch management options and default management mode
- Manage the switch by using the device UI
- About on-network and off-network access
- Access the switch on-network and connected to the Internet
- Use a Windows-based computer to access the switch on-network and connected to the Internet
- Use the NETGEAR Insight mobile app to discover the IP address of the switch
- Use the NETGEAR Switch Discovery Tool to discover the switch when it is connected to the Internet
- Discover the switch in a network with a DHCP server using the Smart Control Center
- Use other options to discover the switch IP address
- Access the switch on-network and connected to the Internet when you know the switch IP address
- Access the switch off-network and not connected to the Internet
- Credentials for the device UI
- Register the switch
- Change the language of the device UI
- Change the management mode of the switch
- Use the Device View of the device UI
- Configure interface settings
- Access the NETGEAR support website
- Access the user manual online
- 2 Configure System Information
- View or define switch system information
- Configure the switch IP address settings
- Configure the IPv6 network interface
- Configure the time settings
- Configure Denial of Service settings
- Configure the DNS settings
- Configure green Ethernet settings
- Use the Device View
- Configure Power over Ethernet
- Configure SNMP
- Configure LLDP
- Configure DHCP snooping
- Set up PoE timer schedules
- 3 Configure Switching
- Configure the port settings and maximum frame size
- Configure link aggregation groups
- Configure VLANs
- Configure a voice VLAN
- Configure Auto-VoIP
- Configure Spanning Tree Protocol
- Configure multicast
- Manage IGMP snooping
- Configure IGMP snooping
- Configure IGMP snooping for interfaces
- View, search, or clear the IGMP snooping table
- Configure IGMP snooping for VLANs
- Modify IGMP snooping settings for a VLAN
- Disable IGMP snooping on a VLAN
- Configure one or more IGMP multicast router interfaces
- Configure an IGMP multicast router VLAN
- IGMP snooping querier overview
- Configure an IGMP snooping querier
- Configure an IGMP snooping querier for a VLAN
- Display the status of the IGMP snooping querier for VLANs
- View, search, and manage the MAC address table
- Configure Layer 2 loop protection
- 4 Configure Quality of Service
- 5 Manage Device Security
- Change the device admin password for the device UI
- Manage the RADIUS settings
- Configure the TACACS+ settings
- Manage the Smart Control Center
- Configure management access
- Control access with profiles and rules
- Configure port authentication
- Set up traffic control
- Configure access control lists
- Use the ACL Wizard to create a simple ACL
- Configure a MAC ACL
- Configure MAC ACL rules
- Configure MAC bindings
- View or delete MAC ACL bindings in the MAC binding table
- Configure a basic or extended IPv4 ACL
- Configure rules for a basic IPv4 ACL
- Configure rules for an extended IPv4 ACL
- Configure an IPv6 ACL
- Configure rules for an IPv6 ACL
- Configure IP ACL interface bindings
- View or delete IP ACL bindings in the IP ACL binding table
- Configure VLAN ACL bindings
- 6 Monitor the System
- 7 Maintain or Troubleshoot the Switch
- A Configuration Examples
- B Specifications and Default Settings
16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
User Manual4
Access the NETGEAR support website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Access the user manual online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Chapter 2 Configure System Information
View or define switch system information . . . . . . . . . . . . . . . . . . . . . . . . . . .49
View or define system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
View the fan status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
View the software versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Configure the switch IP address settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Configure the IPv6 network interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
View the IPv6 network neighbors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Configure the time settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Configure the time settings manually . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Configure the time settings with SNTP and configure the
global SNTP settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
View the SNTP global status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Configure an SNTP server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Configure daylight saving time settings . . . . . . . . . . . . . . . . . . . . . . . . . .70
View the daylight saving time status . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Configure Denial of Service settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Configure Auto-DoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Configure Denial of Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Configure the DNS settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Configure the global DNS settings and add a DNS server. . . . . . . . . . .78
Remove a DNS server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Configure and view host name-to-IP address information. . . . . . . . . . .81
Configure green Ethernet settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Configure the green Ethernet global settings . . . . . . . . . . . . . . . . . . . . .84
Configure the green Ethernet interface settings . . . . . . . . . . . . . . . . . . .85
Use the Device View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Configure Power over Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
PoE concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Device class power requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Power allocation and power budget concepts. . . . . . . . . . . . . . . . . . . . .88
Configure the global PoE settings and view PoE information . . . . . . . .90
Configure the PoE port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Configure SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Configure the SNMPv1 and SNMPv2 community . . . . . . . . . . . . . . . . . .95
Configure SNMPv1 and SNMPv2 trap settings. . . . . . . . . . . . . . . . . . . . .98
Configure SNMPv1 and SNMPv2 trap flags . . . . . . . . . . . . . . . . . . . . . 101
View the supported MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Configure SNMPv3 users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Configure LLDP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
Configure LLDP global settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Configure LLDP port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
View LLDP-MED network policy information . . . . . . . . . . . . . . . . . . . . 109
Configure LLDP-MED port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110