User Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Monitor the System User Manual371
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 17 or Access the switch off-network and not
connected to the Internet on page 25.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 28.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 26.
5. Click the Go
button.
The System Information page displays.
6. Select Monitoring >
Logs > Memory Log.
The Memory Log page displays.
7. Select one of the following Admin Status radio buttons:
•
Enable. Enable system logging. This is the default setting.
•
Disable. Prevent the system from logging messages.
8. From
the Behavior
menu, specify the behavior of the log when it is full:
• Wrap. When the buffer is full, the oldest log messages are deleted as the system logs
new messages.
•
Stop on Full. When the buffer is full, the system stops logging new messag
es and
preserves all existing log messages.
9. From the Severity
Filter menu, select the logging level for messages that must be logged.
Log messages with the selected severity level and all log messages of greater severity
are logged. For example, if you select Warning
, the logged messages include Warning,
Error, Critical, Alert, and Emergency. The default severity level is Informational (6).
The severity can be one of the following levels:
• Emergency. System is unusable. This is level 0.
• Alert. Action must be taken immediately. This is level 1.
•
Critical. Critical conditions. This is level 2.
•
Error. Error conditions. This is level 3.
•
Warning. Warning conditions.
This is level 4.
• Notice. Normal but significant conditions. This is level 5.
•
Informational. Informational messages. This is level 6, and the default sett
ing.
• Debug. Debug-level messages. This is level 7.