User Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual341
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 17 or Access the switch off-network and not
connected to the Internet on page 25.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 28.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 26.
5. Click the Go
button.
The System Information page displays.
6. Select Security > ACL
> Advanced > IPv6 Rules.
The previous figure does not show all columns on the page.
If no rules exists, the IPv6 ACL Rule Table might show the message No rules were
configured for this ACL. If one or more rules exist for the ACL, the rules display in
the
IPv6 Rules table.
7. From the ACL Name menu,
select the IPv6 ACL for which you want to add a rule.
An IPv6 ACL can contain up to 50 rules.
8. Click the Add
button.