User Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual339
The following table describes the nonconfigurable information displayed on the page.
Table 58. IPv6 Configuration and IPv6 ACL Table information
Field Description
Current Number of ACL The current number of the IP ACLs configured on the switch.
Maximum ACL The maximum number of IP ACLs that can be configured on the switch.
Rules The number of the rules associated with the IP ACL.
Type The type is IPv6 ACL.
Change the name of an IPv6 ACL
To change the name of an IPv6 ACL:
1. Connect your computer
to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch
a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 17 or Access the switch off-network and not
connected to the Internet on page 25.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 28.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 26.
5. Click the Go
button.
The System Information page displays.
6. Select Security > ACL
> Advanced > IPv6 ACL.
The IPv6 ACL Configuration page displays.
7. Select the check box that is associated with the IPv6 ACL.
8. In the IPv6
ACL field,
specify the new name.
9. Click the Apply
button.
Your settings are saved.