User Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual286
Initialize 802.1X on a port
To initialize 802.1X on a port:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 17 or Access the switch off-network and not
connected to the Internet on page 25.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 28.
4. Enter one of the following passwords:
• Enter your device admin password.
PAE Capabilities The port access entity (PAE) functionality of the selected port. The option is
Authenticator or Supplicant.
Authenticator PAE State The current state of the authenticator PAE state machine. The options are as
follows:
• Initialize
• Disconnected
• Connecting
• Authenticating
• Authenticated
• Aborting
• Held
• ForceAuthorized
• ForceUnauthorized
Backend State The current state of the backend authentication state machine. The options are
as follows:
• Request
• Response
• Success
• Fail
• Timeout
• Initialize
• Idle
Table 51. Port authentication status information (continued)
Field Description