User Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual268
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 26.
5. Click the Go
button.
The System Information page displays.
6. Select Security > Access
> HTTPS > HTTPS Configuration.
7. Select the Admin Mode Enable or Disable radio button.
This selection enables or disables HTTPS. The default value is Disable.
Note: You can download SSL certificates only when HTTPS is disabled.
8. In the HTTPS Port
field, type the HTTPS port number.
The range is from 1025 to 65535. The default is port 443.
9. In the HTTPS Session Soft Timeout (Minutes) field,
enter the inactivity time-out for HTTPS
sessions.
The range is from 1 to 60 minutes. The default value is 5 minutes.
10. In the HTTPS Session
Hard Timeout (Hours) field, set the hard time-out for HTTPS
sessions.
This time-out is unaffected by the activity level of the session. The range is
from 1 to 168
hours. The default is 24 hours.
11. In the Maximum Number of HTTPS Sessions field, enter the maximum allowable number
of HTTPS sessions.
The range is from 1 to 4 sessions. The default is 4 sessions.
12. Click the Apply
button.
Your settings are saved.
Browser security warning with HTTPS access
After you enable HTTPS access (see Configure HTTP access settings on page 266) and you
attempt to access the device UI, your browser might display a security warning that your
connection is not private or not secure, or that a problem with the security certificate
occurred.