User Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure System Information User Manual123
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 26.
5. Click the Go
button.
The System Information page displays.
6. Select System> Services >
DHCP Snooping > Binding Configuration.
7. From the Interface menu, select the interface on which the DHCP client is authorized.
8. In the MAC Address
field, specify the MAC address for the binding to be added.
This is the key to the binding database.
9. From the VLAN ID
menu, select the ID of the VLAN that the client is authorized to use.
10. In the IP Address
field, specify the IP address of the client.
11. Click the Add
button.
The DHCP snooping binding entry is added to the database.
The Dynamic Binding Configuration table shows information about the DHCP bindings that
were learned on each interface on which DHCP snooping is enabled. The following table
describes the dynamic bindings information.
Table 20. DHCP Dynamic Configuration information
Field Description
Interface The interface on which the DHCP client message was received.
MAC Address The MAC address associated with the DHCP client that sent the message. This is the
key to the binding database.
VLAN ID The VLAN ID of the client interface.
IP Address The IP address assigned to the client by the DHCP server
.
Lease Time The remaining IP address lease time for the client.