User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual283
• Server Timeout. Specify the time in seconds that elapses before the switch resends
a request to the authentication server. The server time-out period must be a value in
the range from 1 to 65535. The default value is 30 seconds.
10. Click the Apply
button.
Your settings are saved.
The following table describes the port authentication status information available on the
page.
Table 50. Port authentication status information
Field Description
Control Direction The control direction for the specified port, which is always Both. The control
direction dictates the degree to which protocol exchanges take place between
supplicant
and authenticator.The unauthorized controlled port exerts control over
communication in both directions (disabling both incoming and outgoing frames).
Protocol Version The protocol version associated with the selected port. The only possible value
is 1, corresponding to the first version of the 802.1X specification.
PAE Capabilities The port access entity (PAE) functionality of the selected port.
The option is
Authenticator or Supplicant.
Authenticator PAE State The current state of the authenticator P
AE state machine. The options are as
follows:
Backend State The current state of the backend authentication state machine. The options are
as follows:
• Initialize
• Disconnected
• Connecting
• Authenticating
• Authenticated
• Aborting
• Held
• ForceAuthorized
• ForceUnauthorized
• Request
• Response
• Success
• Fail
• T
imeout
• Initialize
• Idle