User Manual
Table Of Contents
- 24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports and Cloud Management
- Contents
- 1 Get Started
- Available publications
- Switch management options and default management mode
- Manage the switch by using the local browser UI
- About on-network and off-network access
- Access the switch on-network and connected to the Internet
- Use a Windows-based computer to access the switch on-network
- Use the NETGEAR Insight mobile app to discover the IP address of the switch
- Use the NETGEAR Switch Discovery Tool to discover the switch
- Discover the switch in a network with a DHCP server using the Smart Control Center
- Discover the switch in a network without a DHCP server using the Smart Control Center
- Use other options to discover the switch IP address
- Access the switch on-network when you know the switch IP address
- Access the switch off-network
- Credentials for the local browser UI
- Register the switch
- Change the language of the local browser UI
- Change the management mode of the switch
- Use the Device View of the local browser UI
- Configure interface settings
- Access the NETGEAR support website
- Access the user manual online
- 2 Configure System Information
- View or define switch system information
- Configure the switch IP address settings
- Configure the IPv6 network interface
- Configure the time settings
- Configure Denial of Service settings
- Configure the DNS settings
- Configure Green Ethernet settings
- Use the Device View
- Configure Power over Ethernet
- Configure SNMP
- Configure LLDP
- Configure DHCP snooping
- Set up PoE timer schedules
- 3 Configure Switching
- Configure the port settings and maximum frame size
- Configure link aggregation groups
- Configure VLANs
- Configure a voice VLAN
- Configure Auto-VoIP
- Configure Spanning Tree Protocol
- Configure multicast
- Manage IGMP snooping
- Configure IGMP snooping
- Configure IGMP snooping for interfaces
- View, search, or clear the IGMP snooping table
- Configure IGMP snooping for VLANs
- Modify IGMP snooping settings for a VLAN
- Disable IGMP snooping on a VLAN
- Configure one or more IGMP multicast router interfaces
- Configure an IGMP multicast router VLAN
- IGMP snooping querier overview
- Configure an IGMP snooping querier
- Configure an IGMP snooping querier for a VLAN
- Display the status of the IGMP snooping querier for VLANs
- View, search, and manage the MAC address table
- Configure Layer 2 loop protection
- 4 Configure Quality of Service
- 5 Manage Device Security
- Change the local device password for the local browser UI
- Manage the RADIUS settings
- Configure the TACACS+ settings
- Manage the Smart Control Center Utility
- Configure management access
- Control access with profiles and rules
- Configure port authentication
- Set up traffic control
- Configure access control lists
- Use the ACL Wizard to create a simple ACL
- Configure a MAC ACL
- Configure MAC ACL rules
- Configure MAC bindings
- View or delete MAC ACL bindings in the MAC binding table
- Configure a basic or extended IPv4 ACL
- Configure rules for a basic IPv4 ACL
- Configure rules for an extended IPv4 ACL
- Configure an IPv6 ACL
- Configure rules for an IPv6 ACL
- Configure IP ACL interface bindings
- View or delete IP ACL bindings in the IP ACL binding table
- Configure VLAN ACL bindings
- 6 Monitor the System
- 7 Maintain or Troubleshoot the Switch
- A Configuration Examples
- B Specifications and Default Settings
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Get Started User Manual27
5. Enter your credentials, which depend on the page that displays:
• Register to unlock all features page displays. If this is the first time that you log in
to the local browser UI, the Register to unlock all features page displays. Click the
Log in with NETGEAR account button, and follow the directions onscreen to
register the switch with your NETGEAR email address and password.
Y
ou are only
prompted to do this once to confirm registration of your switch.
If you did not yet create a NETGEAR account, click the Create account link, follow
the directions onscreen to create an account, and register the switch with your
NETGEAR email address and password.
• Local Device Login page displays.
If you previously logged in to the local browser UI
and already entered your NETGEAR email address and password, the Local Device
Login page displays. Enter one of the following credentials:
- Local device password.
Enter the local device password.
The default local device password is password. The first time that you enter the
default local device password, the Change Default Password page
displays,
requiring you to customize the local device password.
- Insight network password. If you previously logged in to the local browser UI,
you changed the management mode to NETGEAR Insight, and you added the
switch to
an Insight network location, enter the Insight network password to access
the local browser UI.
Note: After you add the switch to an Insight network location, the Insight
network password replaces the switch local device password.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
6. Click the Login
button.
7. If the Change Default Password page displays, enter and confirm a new local device
password,
and click the Submit button.
The System Information page displays. You can now configure the switch.
Access the switch off-network
If the switch is off-network and not connected to the Internet, before you can unlock the full
menu of the local browser UI, you must do one of the following:
• Connect the switch to a network with Internet access at least once so that you can
register the switch with NETGEAR.
• Get a registration key.
For more information about these registration options, see
Register the switch on page 31.