User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Quality of Service User Manual231
The policy name is a hyperlink to the page on which you can define the policy attributes.
11. Configure the policy attributes by selecting one of the following radio buttons:
• Assign Queue. Select this radio button to specify that traffic must be assigned to a
queue, which you must select from the menu. The queue is expres
sed as a value in
the range from 0 to 7.
• Drop. Select this radio button to require each inbound packet to be dropped.
• Mark VLAN CoS.
Select this
radio button to specify the VLAN priority, which you must
select from the menu. The VLAN priority is expressed as a value in the range from 0
to 7.
• Mark IP Precedence. Select this
radio button to require packets to be marked with an
IP precedence value before being forwarded. You must select an IP precedence
value from 0 to 7 from the menu.
• Mirror. Select this radio button to require packets to be mirrored to an interface or
LAG, one of which you must select from the menu.
• Redirect. Select this
radio button to require packets to be redirected to an interface or
LAG, one of which you must select from the menu.
• Mark IP DSCP. Select this radio button to require packet to be marked with an IP
DSCP keyword code, which you must select from the menu. The DSCP value is
defined as the high-order 6 bits of the Service
Type octet in the IP header.
• Simple Policy. Select this radio button to define the traffic policing style for the class.
By default, this simple policy is color blind, and color classes do not apply.
A simple