User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure System Information User Manual50
6. Select the Clock Source Local radio button.
7. In the Date field, specify the current date in months, days, and years (MM/DD/YYYY).
8. In the T
ime field, specify the current time in hours, minutes, and seconds (HH:MM:SS).
Note: If you do not enter a date and time, the switch calculates the date and
time using the CPU’s clock cycle.
9. Click the Apply button.
Your settings are saved.
Configure the time settings with SNTP
To configure the time by using SNTP:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of the
switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select System > Management > T
ime > Time Configuration
.
The Time Configuration page displays.
6. Select the Clock Source SNTP radio button.
The page refreshes and displays the SNTP Global Configuration section and the SNTP
Global Status section.