User Manual
Table Of Contents
- 8-Port or 16-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports
- Contents
- 1 Get Started
- Available publications
- Switch management and discovery overview
- Change the default IP address of the switch
- Discover or change the switch IP address
- About the user interfaces
- Access the local browser interface
- Change the language of the local browser interface
- Use the Device View of the local browser interface
- Interface naming conventions
- Configure interface settings
- Context–sensitive help and access to the support website
- Access the user manual online
- Register your product
- 2 Configure System Information
- View or define system information
- Configure the IP network settings for management access
- Configure the time settings
- Configure denial of service settings
- Configure the DNS settings
- Configure green Ethernet settings
- Use the Device View
- Configure Power over Ethernet
- Configure SNMP
- Configure LLDP
- Configure a DHCP L2 relay, DHCP snooping, and dynamic ARP inspection
- Set up PoE timer schedules
- 3 Configure Switching
- Configure the port settings
- Configure link aggregation groups
- Configure VLANs
- Configure a voice VLAN
- Configure Auto-VoIP
- Configure Spanning Tree Protocol
- Configure multicast
- Manage IGMP snooping
- Configure IGMP snooping
- Configure IGMP snooping for interfaces
- View, search, or clear the IGMP snooping table
- Configure IGMP snooping for VLANs
- Modify IGMP snooping settings for a VLAN
- Disable IGMP snooping on a VLAN and remove it from the table
- Configure one or more IGMP multicast router interfaces
- Configure an IGMP multicast router VLAN
- IGMP snooping querier overview
- Configure an IGMP snooping querier
- Configure an IGMP snooping querier for a VLAN
- Display the status of the IGMP snooping querier for VLANs
- Manage MLD snooping
- Enable MLD snooping
- Configure MLD snooping for interfaces
- Configure the MLD VLAN settings
- Modify the MLD snooping settings for a VLAN
- Remove MLD snooping from a VLAN
- Configure one or more MLD multicast router interfaces
- Configure an MLD multicast router VLAN
- Configure an MLD snooping querier
- Configure the MLD snooping querier VLAN settings
- Configure multicast VLAN registration
- View, search, and manage the MAC address table
- Configure Layer 2 loop protection
- 4 Configure Routing
- 5 Configure Quality of Service
- 6 Manage Device Security
- Change the device password for the local browser interface
- Manage the RADIUS settings
- Configure the TACACS+ settings
- Configure authentication lists
- Manage the Smart Control Center Utility
- Configure management access
- Control access with profiles and rules
- Configure port authentication
- Set up traffic control
- Configure access control lists
- Use the ACL Wizard to create a simple ACL
- Configure a MAC ACL
- Configure MAC ACL rules
- Configure MAC bindings
- View or delete MAC ACL bindings in the MAC binding table
- Configure a basic or extended IPv4 ACL
- Configure rules for a basic IPv4 ACL
- Configure rules for an extended IPv4 ACL
- Configure an IPv6 ACL
- Configure rules for an IPv6 ACL
- Configure IP ACL interface bindings
- View or delete IP ACL bindings in the IP ACL binding table
- Configure VLAN ACL bindings
- 7 Monitor the Switch and the Traffic
- 8 Maintain or Troubleshoot the Switch
- A Configuration Examples
- B Specifications and Default Settings
8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Specifications and Default Settings User Manual479
Hardware technical specifications
The following table describes the hardware technical specifications.
Table 106. Hardware technical specifications
Feature Model GS418TPP Model GS510TLP Model GS510TPP
Network interfaces Eight
10/100/1000BASE-T RJ-45
PoE+ copper ports
Eight
10/100/1000BASE-T RJ-45
PoE+ copper ports
Sixteen
10/100/1000BASE-T RJ-45
PoE+ copper ports
Two 100/1000BASE-X
fiber SFP ports
Two 100/1000BASE-X fiber
SFP ports
Two 100/1000BASE-X fiber
SFP ports
USB ports One None None
Fans One fixed, internal None One fixed, internal
Power supply One fixed, internal One fixed, internal One fixed, internal
Switch PoE+ power
budget
240W 75W 190W
Maximum power
consumption
With PoE: 282.3W
Without PoE: 17.8W
With PoE: 101W
Without PoE: 10.5W
With PoE: 225W
Without PoE: 12.5W
Dimensions
(W x D x H)
17.3 x 3.9 x 1.7 in.
(440 x 100 x 43 mm)
12.9 x 6.7 x 1.7 in.
(328 x 169 x 43 mm)
12.9 x 6.7 x 1.7 in.
(328 x 169 x 43 mm)
Weight 4.72 lb (2.14 kg) 3.84 lb (1.74 kg) 4.03 lb (1.83 kg)
Operating temperature 32º to 122ºF (0° to 50°C)
Operating humidity 90% maximum relative humidity, noncondensing
Maximum operating
altitude
10,000 ft (3,000 m)
Storage temperature –4° to 158°F (–20º to 70ºC)
Storage humidity 95% maximum relative humidity, noncondensing
Maximum storage
altitude
10,000 ft (3,000 m)










