User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Specifications and Default Settings User Manual476
Traffic control settings
The following table describes the traffic control settings.
Table 101. Traffic control settings
Feature Sets Supported Default
Storm control All ports Disabled
Jumbo frame All ports Disabled
Maximum = 9216 bytes
Quality of Service settings
The following table describes the Quality of Service settings.
Table 102. Quality of Service settings
Feature Sets Supported Default
Number of queues 8 N/A
802.1p 1 Enabled
DSCP 1 Disabled
Egress rate limiting All ports Disabled
802.3x flow control/back pressure All ports Disabled
Port mirroring: TX, RX, both 1 Disabled
Port trunking (aggregation) 8 Preconfigured
802.1D spanning tree 1 Disabled
802.1w RSTP 1 Enabled
802.1s spanning tree 8 instances Disabled
Static 802.1Q tagging 256 VID = 1
The maximum number of member
ports is equal to the number of
ports on the switch.
Learning process Supports static and dynamic MAC
entries
Dynamic learning is enabled by
default
Table 100. Port characteristics (continued)
Feature Sets Supported Default