User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Maintain or Troubleshoot the Switch User Manual431
9. Click the Apply button.
The file transfer begins.
The page displays information about the progress of the file transfer. After a file transfer is
started, wait until the page refreshes. When the page refreshes, the option to select a file
option is no longer available, indicating that the file transfer is complete.
Note: After you download a text configuration file, the switch applies the
configuration automatically.
10. After you download a software image file, if you want the switch to run the software image,
do the following:
a. Select the new software image file (see
Change the software image that loads when
the switch starts or reboots on page 434).
b. Reboot the switch (see
Reboot the switch on page 421).
Download a file from a USB device
Note: Model GS418TPP supports a USB device. Models GS519TLP and
GS510TPP do not.
You can download a file from a USB device to the switch.
To download a file from a USB device:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of
the switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Maintenance > Download > USB File Download.