User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure System Information User Manual42
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select System > Management > System CPU Status > CPU Threshold.
6. Specify the thresholds:
• Rising Threshold. Notification is generated when the total CPU utilization exceeds
this threshold value over the configured time period. The range is 1 to 100.
• Rising Interval
. This utilization monitoring time period can be configured from 5 to
86400 seconds in multiples of 5 seconds.
• Falling Threshold
. Notification is triggered when the total CPU utilization falls below
this level for a configured period of time.
The falling utilization threshold must be equal to or less than the rising threshold
value. The falling utilization threshold notification is sent only if a rising threshold
notification was sent previously. Configuring the falling utilization threshold and time
period is optional. If the Falling CPU utilization settings are not configured, the
settings automatically get the same values as the Rising CPU utilization settings.
The
range is 1 to 100.
• Falling Interval.
The utilization monitoring time period can be configured from 5
seconds to 86400 seconds in multiples of 5 seconds.
• Free Memory Threshold
. The free memory threshold value for the CPU in KB.
7. Click the Apply button.
Y
our settings are saved.
View the USB device information
Note: Model GS418TPP supports a USB port but models GS510TLP and
GS510TPP do not. Therefore, the information in this section refers to
model GS418TPP only.