User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Monitor the Switch and the Traffic User Manual410
• <15>Aug 24 05:34:05 STK0 MSTP[2110]: mspt_api.c(318) 237%%
Interface 12 transitioned to root state on message age timer
expiry.
This example indicates a user-level message (1) with severity 7 (debug) on a system that
is not a chassis and generated by component MSTP running in thread ID 2110 on
Aug 24
05:34:05 by line 318 of file mstp_api.c. This is the 237th message logged. Messages
logged to a collector or relay through syslog use a format identical to the previous
message.
Manage and view the flash log
The flash log is a persistent log, that is, is a log that is stored in persistent storage. Persistent
storage survives across platform reboots. The first log type is the system startup log. The
system startup log stores the first 32 messages received after system reboot. The second log
type is the system operation log. The system operation log stores messages received during
system operation.
To manage and view the flash log:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of the
switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Monitoring > Logs > FLASH Log.
The FLASH Log Configuration page displays.
6. Select one of the following
Admin Status radio buttons:
•
Enable. A log that is enabled logs messages.
•
Disable. A log that is disabled does not log messages.
7. From the
Severity Filter menu, select the logging level for messages that must be sent to
the logging host.
Log messages with the selected severity level and all log messages of greater severity
are sent to the host. For example, if you select Error, the logged messages include Error
,