User Manual
Table Of Contents
- 8-Port or 16-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports
- Contents
- 1 Get Started
- Available publications
- Switch management and discovery overview
- Change the default IP address of the switch
- Discover or change the switch IP address
- About the user interfaces
- Access the local browser interface
- Change the language of the local browser interface
- Use the Device View of the local browser interface
- Interface naming conventions
- Configure interface settings
- Context–sensitive help and access to the support website
- Access the user manual online
- Register your product
- 2 Configure System Information
- View or define system information
- Configure the IP network settings for management access
- Configure the time settings
- Configure denial of service settings
- Configure the DNS settings
- Configure green Ethernet settings
- Use the Device View
- Configure Power over Ethernet
- Configure SNMP
- Configure LLDP
- Configure a DHCP L2 relay, DHCP snooping, and dynamic ARP inspection
- Set up PoE timer schedules
- 3 Configure Switching
- Configure the port settings
- Configure link aggregation groups
- Configure VLANs
- Configure a voice VLAN
- Configure Auto-VoIP
- Configure Spanning Tree Protocol
- Configure multicast
- Manage IGMP snooping
- Configure IGMP snooping
- Configure IGMP snooping for interfaces
- View, search, or clear the IGMP snooping table
- Configure IGMP snooping for VLANs
- Modify IGMP snooping settings for a VLAN
- Disable IGMP snooping on a VLAN and remove it from the table
- Configure one or more IGMP multicast router interfaces
- Configure an IGMP multicast router VLAN
- IGMP snooping querier overview
- Configure an IGMP snooping querier
- Configure an IGMP snooping querier for a VLAN
- Display the status of the IGMP snooping querier for VLANs
- Manage MLD snooping
- Enable MLD snooping
- Configure MLD snooping for interfaces
- Configure the MLD VLAN settings
- Modify the MLD snooping settings for a VLAN
- Remove MLD snooping from a VLAN
- Configure one or more MLD multicast router interfaces
- Configure an MLD multicast router VLAN
- Configure an MLD snooping querier
- Configure the MLD snooping querier VLAN settings
- Configure multicast VLAN registration
- View, search, and manage the MAC address table
- Configure Layer 2 loop protection
- 4 Configure Routing
- 5 Configure Quality of Service
- 6 Manage Device Security
- Change the device password for the local browser interface
- Manage the RADIUS settings
- Configure the TACACS+ settings
- Configure authentication lists
- Manage the Smart Control Center Utility
- Configure management access
- Control access with profiles and rules
- Configure port authentication
- Set up traffic control
- Configure access control lists
- Use the ACL Wizard to create a simple ACL
- Configure a MAC ACL
- Configure MAC ACL rules
- Configure MAC bindings
- View or delete MAC ACL bindings in the MAC binding table
- Configure a basic or extended IPv4 ACL
- Configure rules for a basic IPv4 ACL
- Configure rules for an extended IPv4 ACL
- Configure an IPv6 ACL
- Configure rules for an IPv6 ACL
- Configure IP ACL interface bindings
- View or delete IP ACL bindings in the IP ACL binding table
- Configure VLAN ACL bindings
- 7 Monitor the Switch and the Traffic
- 8 Maintain or Troubleshoot the Switch
- A Configuration Examples
- B Specifications and Default Settings
8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
User Manual4
local browser interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Configure the IPv6 network settings for the local browser interface . .46
View the IPv6 network neighbor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Configure the time settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Configure the time setting manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Configure the time settings with SNTP . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Configure the global SNTP settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
View the SNTP global status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Configure an SNTP server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Configure daylight saving time settings . . . . . . . . . . . . . . . . . . . . . . . . . .60
View the daylight saving time status . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Configure denial of service settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Configure Auto-DoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Configure denial of service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Configure the DNS settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Configure the global DNS settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Configure and view host name-to-IP address information. . . . . . . . . . .69
Configure green Ethernet settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Enable the green Ethernet settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Configure green Ethernet interface settings. . . . . . . . . . . . . . . . . . . . . . .72
Configure green Ethernet local and remote devices . . . . . . . . . . . . . . .73
View green Ethernet remote device details . . . . . . . . . . . . . . . . . . . . . . .76
View the green Ethernet statistics summary . . . . . . . . . . . . . . . . . . . . . . .77
Configure the green Ethernet EEE LPI history . . . . . . . . . . . . . . . . . . . . .79
Use the Device View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Configure Power over Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Configure the global PoE settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Configure the PoE port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Configure SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Configure the SNMPv1 or SNMPv2 community . . . . . . . . . . . . . . . . . . . .85
Configure SNMPv1 and SNMPv2 trap settings. . . . . . . . . . . . . . . . . . . . .88
Configure SNMPv1 and SNMPv2 trap flags . . . . . . . . . . . . . . . . . . . . . . .90
View the supported MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Configure SNMPv3 users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Configure LLDP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Configure the LLDP global settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
Configure the LLDP port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
View the LLDP-MED network policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Configure the LLDP-MED port settings . . . . . . . . . . . . . . . . . . . . . . . . . . .97
View the local LLDP information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
View the LLDP-MED neighbor device information . . . . . . . . . . . . . . . 101
Configure a DHCP L2 relay, DHCP
snooping, and dynamic ARP inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Configure a DHCP L2 relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Configure DHCP snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Manage dynamic ARP Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Set up PoE timer schedules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Create a PoE timer schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124