User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Manage Device Security User Manual380
8. Configure the following match criteria for the rule:
• Action. Select the ACL forwarding action by selecting one of the following radio
buttons:
- Permit
. Forward packets that meet the ACL criteria.
- Deny. Drop packets that meet the ACL criteria.
• Egress Queue
. If you select the Permit radio button, select the hardware egress
queue identifier that is used to handle all packets matching this IPv6 ACL rule. The
range of queue IDs is 0 to 7.
•
Logging. If you select the Deny radio button, you can enable logging for the ACL by
selecting the Enable
radio button. (Logging is subject to resource availability in the
device.)
If the access list trap flag is also enabled, periodic traps are generated, indicating the
number of times this rule was evoked during the report interval. A fixed five-minute
report interval is used for the switch. A trap is not issued if the
ACL rule hit count is
zero for the current interval.
• Match Every. Select whether all packet must match the selected IPv6 ACL rule:
- Disable
. Not all packets need to match the selected IPv6 ACL rule. Y
ou can
configure other match criteria on the page.
- Enable. All packets must match the selected IPv6 ACL rule and are either
permitted or denied. In this case, you cannot configure other match criteria on the
page.
•
Protocol Type. Specify the IPv6 protocol type in one of the following ways:
- From the Protocol T
ype menu, select IPv6
, ICMPv6, TCP, or UDP.
- From the Protocol Type menu, select Other, and in the associated field, specify
an integer ranging from 0 to 255.
This number represents the IPv6 protocol.