User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Manage Device Security User Manual364
The IP ACL Configuration page displays.
6. Select the check box that is associated with the IP ACL.
7. In the
IP ACL field, specify the new number or name.
8. Click the Apply button.
Your settings are saved.
Delete an IPv4 ACL
To delete an IPv4 ACL:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of the
switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Security > ACL
> Advanced > IP
ACL.
The IP ACL Configuration page displays.
6. Select the check box that is associated with the IP ACL.
7. Click the Delete
button.
The IP ACL is removed.
Configure rules for a basic IPv4 ACL
You can define rules for IP-based standard ACLs (basic ACLs). The access list definition
includes rules that specify whether traffic matching the criteria is forwarded normally or
discarded.
Note: An implicit deny all rule is included at the end of an ACL list. This
means that if an ACL is applied to a packet, and if none of the explicit
rules match, then the final implicit deny all rule applies and the packet
is dropped.