User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure System Information User Manual36
The following table describes the status information that the System Information page
displays.
Table 4. System Information
Field Description
Product Name The product name of this switch.
Serial Number The serial number of the switch.
System Object OID The base object ID for the switch's enterprise MIB.
Date & Time The current date and time.
System Up Time The time in days, hours, and minutes since the last switch reboot.
Base Mac Address Universally assigned hardware address of the switch.
Temp (C) The general temperature of the switch in degrees Centigrade.
Temperature traps range Identifies the minimum and maximum traps range.
View the temperature sensor information
Note: The temperature sensor information is available for model GS418TPP
only.
You can view the current temperature of the temperature sensors. The temperature is instant
and can be updated with the latest information about the switch when you click the Update
button. The maximum temperature of the temperature sensors depends on the actual
hardware.
To view temperature information:
1. Connect your computer to the same network as the switch.
Y
ou can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of the
switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.