User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Manage Device Security User Manual344
8. From the Port VLAN Mode menu, select the switch port mode:
• General. Sets the interfaces in general mode, which is the default selection.
• Host. Sets the interfaces in host mode, which is used for private VLAN configurations.
• Promiscuous. Sets the interfaces in promiscuous mode, which is used for private
VLAN configurations.
9. Click the Apply button.
Your settings are saved.
Configure a private VLAN host interface
To configure a private VLAN host interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of the
switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select Security > T
raffic Control > Private VLAN > Private VLAN Host Interface
Configuration.
6. Select whether to display physical interfaces, LAGs, or both by clicking one of the following
links above the table heading:
•1 (the unit ID of the switch). Only physical interfaces are displayed.
This is the default
setting.
• LAG
. Only LAGs are displayed.
• All. Both physical interfaces and LAGs are displayed.