User Manual

Table Of Contents

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP

Manage Device Security User Manual330

The default password is password.

The System Information page displays.

5. Select Security > Traffic Control > MAC Filter > MAC Filter Configuration.

6. From the MAC Filter menu, select Create Filter.

If you did not configure any filters, this is the only option available.

7. From the VLAN ID menu, select the VLAN that must be used with the MAC address.

8. In the MAC Address field, specify the MAC address of the filter in the format

XX:XX:XX:XX:XX:XX.

You cannot define filters for the following MAC addresses:

• 00:00:00:00:00:00

• 01:80:C2:00:00:00 to 01:80:C2:00:00:0F

• 01:80:C2:00:00:20 to 01:80:C2:00:00:21

• FF:FF:FF:FF:FF:FF

9. In the Port and LAG tables in the Source Port Members section, select the ports and LAGs

that must be included in the inbound filter

If a packet with the MAC address and VLAN ID that you specify is received on a port that

is not part of the inbound filter, the packet is dropped.