User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Manage Device Security User Manual314
• SSL DH Weak Encryption Parameter PEM File. SSL Diffie-Hellman Weak Encryption
Parameter file (PEM Encoded)
• SSL DH Strong Encryption Parameter PEM File. SSL Diffie-Hellman Strong
Encryption Parameter File (PEM Encoded)
7. From the
Server Address T
ype menu, select IPv4, IPv6, or DNS to indicate the format of
the TFTP/SFTP/SCP Server Address field.
The default is IPv4.
8. In the TFTP Server IP field, specify the address of the TFTP server
.
The address can be an IP address in standard x.x.x.x format or a host name. The host
name must start with a letter of the alphabet. Make sure that the software image or other
file to be downloaded is available on the TFTP server
.
9. In the Remote File Path field, enter the path of the file to download.
You can enter up to 96 characters. The default is blank.
10. In the Remote File Name field, enter the name of the file on the TFTP server to download.
Y
ou can enter up to 32 characters. The default is blank.
11. Select the Start File Transfer
check box.
12. Click the Apply button.
The file transfer starts. A status message displays during the transfer and upon
successful completion of the transfer
.
Control access with profiles and rules
Access control allows you to configure an access control profile and set rules for access to
the local browser interface, access by SNMP stations, and client access to a TFTP server.
We refer to an access control profile as an access profile. You can add a single access
profile, which you can configure, activate, or deactivate.
CAUTION:
If you configure a security access profile incorrectly and you activate the
access profile, you might no longer be able to access the switch’s local
browser interface. If that situation occurs, you must reset the switch to
factory default settings (see
Reset the switch to its factory default settings
on page 422).