User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Manage Device Security User Manual313
Before you download a file to the switch, the following conditions must be true:
• The file to download from the TFTP server is on the server in the appropriate directory.
• The file is in the correct format.
• The switch contains a path to the
TFTP server.
Note: Before you can transfer a certificate, you must disable HTTPS (see
Configure HTTPS access settings on page 309) and log back in to
the local browser interface over an HTTP session. After you transfer
the certificate, you can reenable HTTPS and log back in to the local
browser interface over an HTTPS session.
To configure the certificate transfer settings for HTTPS sessions:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of
the switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select Security >
Access > HTTPS > Certificate Download.
6. From the File Type menu, select the type of SSL certificate to download, which can be one
of the following:
• SSL Trusted Root Certificate PEM File. SSL
Trusted Root Certificate file (PEM
Encoded)
•
SSL Server Certificate PEM File. SSL Server Certificate File (PEM Encoded)