User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Manage Device Security User Manual310
This enables or disables the administrative mode of secure HTTP (HTTPS). The
configured value is displayed. The default value is Disable. You can download SSL
certificates only when the HTTPS admin mode is disabled. HTTPS admin mode can be
enabled only if a certificate is present on the device.
7. Select the SSL Version 3
Enable or Disable radio button.
This enables or disables Secure Sockets Layer version 3.0. The configured value is
displayed. The default value is Enable.
8. Select the TLS V
ersion 1 Enable or Disable radio button.
This enables or disables Transport Layer Security (TLS) version 1.0 and TLS version 1.2.
The configured value is displayed. The default value is Enable.
9. In the
HTTPS Port field, type the HTTPS port number.
The value must be in the range of 1025 to 65535. Port 443 is the default value. The
configured value is displayed.
10. In the HTTPS Session Soft Timeout (Minutes) field, enter the inactivity time-out for HTTPS
sessions.
The value must be in the range of 1 to 60 minutes.
The default value is 5 minutes. The
configured value is displayed.
11. In the HTTPS Session Hard Timeout (Hours)
field, set the hard time-out for HTTPS
sessions.
This time-out is unaffected by the activity level of the session. The value must be in the
range of 1 to 168 hours. The default value is 24 hours.
12. In the
Maximum Number of HTTPS Sessions field, enter the maximum allowable number
of HTTPS sessions.
The value must be in the range of 0 to 4. The default value is 4.
13. Click the Apply button.
Your settings are saved.