User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Manage Device Security User Manual306
6. Select the check box next to the dot1xList name.
7. From the menu in the 1 column, select the method that must be used r first in the selected
authentication login list.
The options are as follows:
• Local.
The user’s locally stored ID and password are used for authentication.
• Radius
. The user’
s ID and password are authenticated using the RADIUS server
instead of locally.
• None. The user is not authenticated.
8. Click the Apply button.
Y
our settings are saved.
Manage the Smart Control Center Utility
As a security enhancement, you can disable the Smart Control Center SCC utility. By default,
the utility is enabled and allows you to configure the switch (see
Discover a switch in a
network with a DHCP server on page 14 and Discover a switch in a network without a
DHCP server on page 15).
To enable or disable the SCC administrative mode:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of the
switch on page 13.
The login window opens.