User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Get Started User Manual27
Power LED
The Power LED is a bicolor LED that serves as an indicator of power. For the Device View,
the only option is solid green, which indicates that power is supplied to the switch and
operating normally.
Fan LED
The Fan LED indicates the following status:
• Solid yellow. The fan is faulty.
•
Off. The fan is operating normally.
Interface naming conventions
The switch supports physical and logical interfaces. Interfaces are identified by their type and
the interface number. The physical ports are Gigabit interfaces and are numbered on the
front panel. You configure the logical interfaces by using the software.
The following table describes the naming convention for all interfaces available on the switch.
Table 3. Naming conventions for interfaces
Interface Description Example
Physical The physical ports are Gigabit Ethernet interfaces
and are numbered sequentially starting from 1.
g1, g2, g12
Link aggregation group (LAG) LAG interfaces are logical interfaces that are used
only for bridging functions.
l1, l2, l3
CPU management interface This is the internal switch interface responsible for
the switch base MAC address.
This interface is
not configurable and is always listed in the MAC
Address Table.
c1
Routing VLAN interfaces This is an interface used for routing functionality
. VLAN 1, VLAN 2, VLAN 3
Configure interface settings
For some features that allow you to configure interface settings, you can apply the same
settings simultaneously to any of the following:
• A single port
• Multiple ports
• All ports