User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure Routing User Manual251
6. Navigate through the table by doing the following:
• From the Rows per page menu, select how many table entries are displayed per
page.
Possible values are 20, 50, 100, 200, and All. If you select All, the browser might be
slow to display the information.
• Click the < button to display the previous page of the table data entries.
• Click the > button to display the next page of the table data entries.
7. To refresh the page with the latest information about the switch, click the Update button.
The following table describes the nonconfigurable information displayed on the page.
Table 66. ARP cache information
Field Description
Management VLAN ARP Cache
IP Address The IP address associated with the system’s MAC address. This must be the IP
address of a device on a subnet attached to one of the switch’s existing routing
interfaces.
Port The associated interface ID of the connection.
MAC Address The unicast MAC address of the device. The address is six two-digit hexadecimal
numbers separated by colons, for example, 00:06:29:32:81:40.
Routing VLANs
ARP Cache
IP Address The IP address. It must be the IP address of a device on a subnet attached to one of
the switch’
s existing routing interfaces.
Interface The routing interface associated with the ARP entry
.
MAC Address The unicast MAC address of the device. The address is six two-digit hexadecimal
numbers separated by colons, for example 00:06:29:32:81:40.
Type The type of ARP entry. Possible values are as follows:
Age The time since the entry was last refreshed in the ARP table (in seconds).
• Local.
An ARP entry associated with one of the switch’s routing interface’s
MAC addresses.
• Gateway. A dynamic
ARP entry whose IP address is that of a router.
• Static. An ARP entry configured by the user.
• Dynamic. An ARP entry that was learned by the router.