User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Get Started User Manual25
The System Information page displays.
5. At the top of the page, select a language from the language menu.
A confirmation pop-up window opens.
6. Click the OK button to confirm.
The switch restarts and you must log in again.
The language of the local browser interface is now set to the language that you selected.
Use the Device View of the local browser
interface
The Device View is a Java
®
applet that displays the ports on the switch. This graphic tool
provides an alternate way to navigate to configuration and monitoring options. The graphic
tool also provides information about device ports, configuration and status, tables, and
feature components.
To use the Device View:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of
the switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select System > Device V
iew.
The Device V
iew page displays.
The following figure shows the Device View page for model GS418TPP.