User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure Routing User Manual246
11. Click the Apply button.
Your settings are saved.
Manage routes and view the routing table
The routing table collects routes from multiple sources: static routes and local routes. The
routing table can learn multiple routes to the same destination from multiple sources. The
routing table lists all routes.
Manually add a route and view the routing table
To manually add a default route or static route and view the routing table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of the
switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select Routing> Routing T
able > Route Configuration.
6. From the Route Type menu, select one of the following route types.
• DefaultRoute. Creates a default route. You must specify the next hop address and
preference.
•
Static. Creates a static route. You must specify the network address, subnet mask,
next hop address, and preference.