User Manual
Table Of Contents
- 8-Port or 16-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports
- Contents
- 1 Get Started
- Available publications
- Switch management and discovery overview
- Change the default IP address of the switch
- Discover or change the switch IP address
- About the user interfaces
- Access the local browser interface
- Change the language of the local browser interface
- Use the Device View of the local browser interface
- Interface naming conventions
- Configure interface settings
- Context–sensitive help and access to the support website
- Access the user manual online
- Register your product
- 2 Configure System Information
- View or define system information
- Configure the IP network settings for management access
- Configure the time settings
- Configure denial of service settings
- Configure the DNS settings
- Configure green Ethernet settings
- Use the Device View
- Configure Power over Ethernet
- Configure SNMP
- Configure LLDP
- Configure a DHCP L2 relay, DHCP snooping, and dynamic ARP inspection
- Set up PoE timer schedules
- 3 Configure Switching
- Configure the port settings
- Configure link aggregation groups
- Configure VLANs
- Configure a voice VLAN
- Configure Auto-VoIP
- Configure Spanning Tree Protocol
- Configure multicast
- Manage IGMP snooping
- Configure IGMP snooping
- Configure IGMP snooping for interfaces
- View, search, or clear the IGMP snooping table
- Configure IGMP snooping for VLANs
- Modify IGMP snooping settings for a VLAN
- Disable IGMP snooping on a VLAN and remove it from the table
- Configure one or more IGMP multicast router interfaces
- Configure an IGMP multicast router VLAN
- IGMP snooping querier overview
- Configure an IGMP snooping querier
- Configure an IGMP snooping querier for a VLAN
- Display the status of the IGMP snooping querier for VLANs
- Manage MLD snooping
- Enable MLD snooping
- Configure MLD snooping for interfaces
- Configure the MLD VLAN settings
- Modify the MLD snooping settings for a VLAN
- Remove MLD snooping from a VLAN
- Configure one or more MLD multicast router interfaces
- Configure an MLD multicast router VLAN
- Configure an MLD snooping querier
- Configure the MLD snooping querier VLAN settings
- Configure multicast VLAN registration
- View, search, and manage the MAC address table
- Configure Layer 2 loop protection
- 4 Configure Routing
- 5 Configure Quality of Service
- 6 Manage Device Security
- Change the device password for the local browser interface
- Manage the RADIUS settings
- Configure the TACACS+ settings
- Configure authentication lists
- Manage the Smart Control Center Utility
- Configure management access
- Control access with profiles and rules
- Configure port authentication
- Set up traffic control
- Configure access control lists
- Use the ACL Wizard to create a simple ACL
- Configure a MAC ACL
- Configure MAC ACL rules
- Configure MAC bindings
- View or delete MAC ACL bindings in the MAC binding table
- Configure a basic or extended IPv4 ACL
- Configure rules for a basic IPv4 ACL
- Configure rules for an extended IPv4 ACL
- Configure an IPv6 ACL
- Configure rules for an IPv6 ACL
- Configure IP ACL interface bindings
- View or delete IP ACL bindings in the IP ACL binding table
- Configure VLAN ACL bindings
- 7 Monitor the Switch and the Traffic
- 8 Maintain or Troubleshoot the Switch
- A Configuration Examples
- B Specifications and Default Settings
8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure Routing User Manual234
The following table describes the nonconfigurable ICMPv6 data that is displayed.
Datagrams Locally Transmitted The number of datagrams that this entity successfully transmitted from
this output interface.
Datagrams Transmit Failed The number of datagrams that this entity failed to transmit successfully.
Datagrams Successfully
Fragmented
The number of IPv6 datagrams that were fragmented at this output
interface.
Datagrams Failed To Fragment The number of output datagrams that could not be fragmented at this
interface.
Datagrams Fragments Created The number of output datagram fragments that were generated as a result
of fragmentation at this output interface.
Multicast Datagrams Received The number of multicast packets received by the interface.
Multicast Datagrams Transmitted The number of multicast packets transmitted by the interface.
Table 62. ICMPv6 Statistics information
Field Description
Total ICMPv6 Messages Received The total number of ICMP messages received by the interface, which
includes all those counted by IPv6IfIcmpInErrors. This interface is the
interface to which the ICMP messages were addressed, which might not
be the input interface for the messages.
ICMPv6 Messages With Errors
Received
The number of ICMP messages that the interface received but determined
as having ICMP-specific errors (bad ICMP checksums, bad length, and so
on).
ICMPv6 Destination Unreachable
Messages Received
The number of ICMP Destination Unreachable messages received by the
interface.
ICMPv6 Messages Prohibited
Administratively Received
The number of ICMP destination unreachable/communication
administratively prohibited messages received by the interface.
ICMPv6
Time Exceeded Messages
Received
The number of ICMP Time Exceeded messages received by the interface.
ICMPv6 Parameter Problem
Messages Received
The number of ICMP Parameter Problem messages received by the
interface.
ICMPv6 Packet Too Big Messages
Received
The number of ICMP Packet Too Big messages received by the interface.
ICMPv6 Echo Request Messages
Received
The number of ICMP Echo (request) messages received by the interface.
ICMPv6 Echo Reply Messages
Received
The number of ICMP Echo Reply messages received by the interface.
Table 61. IPv6 Statistics information (continued)
Field Description