User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure Switching User Manual211
View, search, and manage the MAC
address table
You can view or configure the MAC address table. This table contains information about
unicast entries for which the switch holds forwarding or filtering information. This information
lets the transparent bridging function determine how an incoming frame must be propagated.
If you clear the MAC address entries in the MAC address table, only the dynamic entries are
removed.
View, search, or clear the MAC address table
To view, search, or clear the MAC address table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of
the switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Switching
> Address
Table > Basic > Address Table.
IGMP Query Transmitted The number of transmitted IGMP queries.
IGMP Report V1 Transmitted The number of transmitted IGMP V1 reports.
IGMP Report V2 Transmitted The number of transmitted IGMP V2 reports.
IGMP Leave Transmitted The number of transmitted IGMP leaves.
IGMP Packet Receive Failures The number of IGMP packet receive failures.
IGMP Packet Transmit Failures The number of IGMP packet transmit failures.
Table 54. MVR Statistics information (continued)
Field Definition