User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure Switching User Manual209
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of
the switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select Switching > MVR >
Advanced > MVR Interface Configuration.
6. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the port, or type
the port number in the Go T
o Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the heading
row
.
7. From the Admin Mode
menu, specify whether MVR is enabled by selecting Enable or
Disable.
The default is Disable.
8. From the T
ype menu, specify whether the port is an MVR receiver or an MVR source by
selecting receiver
or a source.
The default port type is none.
9. From the Immediate Leave menu, specify whether the Immediate Leave feature is enabled
by selecting Enable or Disable.
The default is Disable.
10. Click the Apply button.
Your settings are saved.
11. T
o refresh the page with the latest information about the switch, click the Update button.