User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure Switching User Manual206
The System Information page displays.
5. Select Switching > MVR > Basic > MVR Configuration.
6. From the MVR Running menu, select Enable or Disable.
The default is Disable.
7. In the MVR Multicast Vlan field, specify the VLAN on which MVR multicast data is
received.
All source ports belong to this VLAN. The value can be set in a range of 1 to 4093. The
default value is 1.
8. In the MVR Global Query Response T
ime field, set the maximum time that the switch must
wait for an
IGMP group membership report before removing the port from the multicast
group membership.
This time applies only to receiver-port leave processing. When an IGMP query is sent
from a receiver port, the switch waits for the default or configured MVR query time for an
IGMP group membership report before removing the port from the multicast group
membership.
The value is equal to tenths of a second. The range is from 1 to 100 tenths.
The default is 5 tenths or one-half.
9. From the
MVR Mode menu, specify the MVR mode of operation.
The options are compatible and dynamic.
The default is compatible.
10. Click the Apply button.
Y
our settings are saved.
11. T
o refresh the page with the latest information about the switch, click the Update button.
The following table describes the nonconfigurable information displayed on the page.
Table 52. MVR Configuration information
Field Definition
MVR Max Multicast Groups The maximum number of multicast groups that MVR supports.
MVR Current Multicast Groups The number of MVR groups allocated.