User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure Switching User Manual186
The IGMP Snooping Table page displays.
6. In the Search By MAC Address field, specify the MAC address whose MFDB table entry
you want to view.
Enter six two-digit hexadecimal numbers separated by colons, for example
00:01:23:43:45:67.
7. Click the Go
button.
If the address exists, the entry is displayed. An exact match is required.
The following table describes the information in the IGMP snooping table.
Table 48. IGMP Snooping Table information
Field Description
MAC Address The multicast MAC address for which the switch holds forwarding and/or filtering
information. The format is
six two-digit hexadecimal numbers that are separated
by colons, for example, 01:00:5e:45:67:89.
VLAN ID The VLAN ID for which the switch holds forwarding and filtering information.
Type The type of the entry. Static entries are those that are configured by the end
user
. Dynamic entries are added to the table as a result of a learning process or
protocol.
Description The text description of this multicast table entry. Possible values are
Management Configured, Network Configured, and Network
Assisted.
Interface The interfaces that are designated for forwarding (Fwd) and filtering (Flt) for the
associated address.
Configure IGMP snooping for VLANs
To configure IGMP snooping for VLANs:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Change the default IP address of the
switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.