User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure Switching User Manual157
If you do not know the IP address of the switch, see Change the default IP address of
the switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select Switching >
Auto-VoIP > Protocol-based > Port Settings.
6. In the Protocol Based Global Settings section, specify the following global settings:
a. From the Prioritization Type menu, select T
raffic Class or Remark.
This specifies the type of prioritization.
b. From the Class Value menu, specify the CoS class value to be reassigned for packets
that the voice VLAN receives.
7. In the Protocol Based Global Settings section, specify the Auto V
oIP Mode settings:
a. Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
•1
(the unit ID of the switch). Only physical interfaces are displayed. This is the
default setting.
• LAG
. Only LAGs are displayed.
• All. Both physical interfaces and LAGs are displayed.
b. Select one or more interfaces by taking one of the following actions:
• T
o configure a single interface, select the check box associated with the port, or
type the port number in the Go T
o Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the
heading row
.