User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Configure Switching User Manual150
If you do not know the IP address of the switch, see Change the default IP address of the
switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select Switching> VLAN >
Advanced > Protocol Based VLAN Group Configuration.
6. In the Group Name field, type a name for the new group.
You can enter up to 16 characters.
7. In the Protocol field, enter one or more protocols that must be associated with the group.
You can enter keywords such as arp, ip, and ipx. Separate keywords with a comma. Y
ou
can also enter hexadecimal or decimal values in the range of 0x0600 (1536) to 0xFFFF
(65535).
8. In the VLAN ID field, enter the VLAN ID.
The ID can be any number in the range of 1 to 4093. All the ports in the group assign this
VLAN ID to untagged packets received for the protocols that you included in this group.
9. Click the Add button.
The protocol-based VLAN group is added to the switch.
10. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 35. Protocol Based VLAN Group Configuration information
Field Description
Group ID A number used to identify the group created by the user. Group IDs are
automatically assigned when a group is created by the user.
Ports Display all the member ports that belong to the group.