Quick Start Manual

introduction 1-1
CHAPTER 1: INTRODUCTION
The NETGEAR
Model GS504T 4-Port Copper Gigabit Switch provides you with a
low-cost,high-performance network solution and is designed to anchor and intercon-
nect 100/1000 megabits per second (Mbps) workgroups using copper Gigabit links.
Features
The Model GS504T switch has the following key features:
Four full-duplex copper Gigabit ports with standard RJ-45 connectors
Automatic address learning function to build the packet-forwarding
information table
The table contains up to 8,000 media access control (MAC) addresses (that is,
the switch can support networks with as many as 8,000 devices).
Full-duplex mode to double throughput of point-to-point connections by letting
individual ports transmit and receive concurrently when the other end also sup-
ports full-duplex mode
Wire-speed filtering and forwarding of the traffic with no delay
Store-and-forward intelligent processing to minimize erroneous packets on the
network
Easy Plug and Play installation with no software to configure, which saves time
and minimizes the potential for configuration errors
GS504T.Manual.FINAL 6/2/00 12:49 PM Page 9